How to set up Suntech on Navtrix
Suntech trackers using the Universal protocol — such as the ST300, ST8310 and ST4315 — send Navtrix their positions, inputs and outputs, and the keep-alive signal that proves they are powered.
Step by step
Create your Navtrix account — 7 days free, no credit card.
In the dashboard, open Devices and add the tracker with its identifier (IMEI or device ID) and the SUNTECH protocol.
With Suntech's configuration tool or by SMS (as your model's manual describes), set the APN and enter the Navtrix server IP and port.
Start the vehicle (or move the tracker) and wait for the first position on the live map. Your free trial starts counting at that moment.
Server address
- Server IP recommended
- 34.26.86.4
- Alternative: server name (DNS)
- ip.navtrix.app
- Port
- 5000 (TCP or UDP)
Most trackers only accept the IP number — use it. Use the server name (DNS) only if your model's manual asks for a domain.
TCP and UDP are both accepted on the same port. Keep the keep-alive message enabled: it is what shows the tracker is powered while the ignition is off.
Known compatible models
- ST300
- ST310U
- ST340
- ST350
- ST4315
- ST8300
- ST8310
Models known to speak the SUNTECH protocol. The list is not exhaustive and firmware varies between batches and clones: confirm the protocol in your unit's manual.
See how it works
One minute with the live map, alerts and trip history — the same dashboard you get on the free trial.
Other compatible trackers
GT06 (Concox, Jimi IoT)
Concox, Jimi IoT and GT06-protocol clones
Concox GT06N · GT06E · GT02 / GT02A · CRX1 / CRX3 · Jimi JM-VL01 / VL02 / VL03 · VL103M · JM-LL01 · TrackerKing J16 · J14 · OB22 · ET100
Setup guide →
Coban / TK103
GPS103 family: TK103B, TK303, TK403…
Coban TK103B · TK103-2B · TK303F / TK303G · TK403 · GPS102B · GPS103A / GPS103B · GPS104 · GPS306
Setup guide →
Jmak J-R12
J-R11 and J-R12, with CAN data and RFID
Jmak J-R11 · Jmak J-R12
Setup guide →
Android phone
Navtrix app for Android
Setup guide →