Trackers compatible with Navtrix
Navtrix receives data from GPS trackers in four protocol families and from Android phones. They all use the same server address and port.
Which tracker do you have?
✓ Works with Navtrix
GT06 (Concox, Jimi IoT)
Register the IMEI in the dashboard, set the SIM's APN and text the tracker the SERVER command with the Navtrix IP number and port.
Compatible with the GT06 protocol (confirm in the manual): Concox GT06N, GT06E, GT02 / GT02A, CRX1 / CRX3, Jimi JM-VL01 / VL02 / VL03, VL103M, JM-LL01, TrackerKing J16, J14, OB22, ET100
- Server IP recommended
- 34.26.86.4
- Alternative: server name (DNS)
- ip.navtrix.app
- Port
- 5000 (TCP)
Most trackers only accept the IP number — use it. Use the server name (DNS) only if your model's manual asks for a domain.
SMS commands — by IP (recommended)
APN,<apn>#SERVER,0,34.26.86.4,5000,0#
Alternative — with the server name (DNS)
SERVER,1,ip.navtrix.app,5000,0#Commands vary between models and firmware versions: check your tracker's manual. Replace <apn> with your SIM carrier's APN; some firmware asks for a password before the command.
Can't find your model? Email navtrix@navtrix.app
Tracker families
GT06 (Concox, Jimi IoT)
Concox, Jimi IoT and GT06-protocol clones
Concox GT06N · GT06E · GT02 / GT02A · CRX1 / CRX3 · Jimi JM-VL01 / VL02 / VL03 · VL103M · JM-LL01 · TrackerKing J16 · J14 · OB22 · ET100
Setup guide →
Suntech
ST300 family and other Universal-protocol units
ST300 · ST310U · ST340 · ST350 · ST4315 · ST8300 · ST8310
Setup guide →
Coban / TK103
GPS103 family: TK103B, TK303, TK403…
Coban TK103B · TK103-2B · TK303F / TK303G · TK403 · GPS102B · GPS103A / GPS103B · GPS104 · GPS306
Setup guide →
Jmak J-R12
J-R11 and J-R12, with CAN data and RFID
Jmak J-R11 · Jmak J-R12
Setup guide →
Android phone
Navtrix app for Android
Setup guide →
Step by step, for any tracker
- Create your Navtrix account (7 days free, no card).
- In the dashboard, under Devices, add the tracker with its identifier (IMEI) and protocol.
- Set the SIM card's APN and point the tracker at the Navtrix server and port, by SMS or with the manufacturer's tool.
- Start the vehicle and wait for the first position on the live map.
For security, Navtrix only accepts data from trackers registered in the dashboard: unknown devices are ignored until someone adds them.
Models are listed as compatible with each protocol — always confirm the protocol in the manual. Units that speak other protocols (for example H02, Teltonika or Queclink) are not supported yet.
Put your tracker on the map today
Create your account, point your tracker at us and watch the first position come in. 7 days free, no card.
No credit card · free trial on every new tracker · no lock-in